HOW TO PLACE
THE FLYING INSECT ELECTRICAL EXTERMINATOR.
To make them more effective and to get the
best results inside the house or when used in the food
industry, the best thing to do is to place the devices correctly,
as well as knowing the characteristics and morphology of the insects we
are about to eliminate.
The electric appliances do not
have to be placed in zone of airflows.
The more common flying insects in the food industry and inside the
house
are: the house fly, vinegar fly, mosquito, wasps and moths. These insects are attracted by
the ultraviolet light. Its active cycle begins in the springtime,
reproducing themselves quite easily. It is important to keep our devices
already placed and revised at this time to avoid any inconvenience in the operating.
The mosquitoes are very
annoying inside the house, producing irritating stings.
Facts to consider before placing an electrical
exterminators:
-
The dimensions of the room where they are going to be
placed, widthways and the height to calculate how many m3 are, to determine the
number of devices and the appropriate models.
-
Observe the doors and windows, if at any day time the
device is exposed to the sun, the action of attracting insects is inhibited because the sunlight is more intense than the
actinic light of these
exterminators.
-
Avoid placing the devices in airflow areas, or under air-conditioning
or electric fans because these might complicate attracting the fly towards
the electrical exterminators and the particles of the electrocuted
insect would be scatterred around the room more easily.
-
Because of these electrocuted particles, it is advisable not to place
hanging devices around the working zone or food production lines; it is
better using a flying insect exterminator with adhesive, a system
where the fly gets totally stuck.
-
This device must be placed high enough to prevent
standing in the way, but to allow periodically revisions, cleanings and with accessibility
to make a periodic revision, cleaning and maintenance of
these devices.
-
For a correct use, these devices must be always
turned on, and this is why their maintenance and tubes renovation is
very important - the light emission deteriorates about 50 % in 9 months.
If you want to read our other articles on
flies,
mosquitoes and wasps exterminartor as well as some curiosities about these flying insects,
click
below.
