Device designed to prevent birds from perching on the cabinadas boats, hardtop, inflatables, sailboats and professional vessels. Easy to install, it can be folded or removed from its base. The wind, causes a rotational movement at the ends, which deters birds from landing on the boat.

 The StopGull Air is the device designed to prevent the landing of seagulls and shorebirds on boats, hardtop's, inflatable boats, sailboats and professional vessels.

By means of the action of the wind on the flags housed in the ends of the bars, it produces a rotational movement that breaks the protocol of entry of the birds avoiding their perching.

 Pneumatic boat mounting kit, fits all kinds of pneumatic and all his sleeves, forming: acrylic fabric support, flexible belts, and at its end four fastening hooks, two for each side, includes a telescopic mast for tightening end.

 The StopGull Falcon scarecrow is ideal to scare away all types of birds on our boats, yachts or in port facilities. Made of high-strength aeronautical fabric, it stays in flight in a sustained and continuous way with a simple breeze.

 Solution so that the birds do not damage the upper part of the mast.

The StopGull Topmast is designed to prevent gulls, cormorants and shorebirds from perching on the top of the mast, thus preventing breakage of installed elements. It comes with the two types of support. One base and another side support.

 Specially designed for crossarms.

StopGull Spreaders is designed to prevent gulls, cormorants and shorebirds from landing on any type of crossarms. It comes in stainless steel cable AISI 316 of 2mts in length.

 The StopGull Bimini-Sailboat, is designed for biminis collected from sailboats, when the backstay and other elements prevent the rotation of the StopGull Air.

Presented in sections of 95cm (37.40 ''), it is made of nautical acrylic canvas which incorporates the dissuasive pieces S / 27. It is fixed to the bimini by means of tapes with safety locks.

 The Falcon StopGull is designed to scare away shorebirds from ships and port facilities. Its deterrent effect is instantaneous and permanent from just a slight breeze, which allows the Falcon StopGull to perform flights and chopped from 10 to 12 meters projecting the shadow of its silhouette over long distances.

 Replacement StopGull Falcon without mast. Includes a rotating device to insert in the final section of the telescopic mast and nylon monofilament.

StopGull Riel is a deterrent device for all types of birds that includes the rotating element in its base creating instability birds. StopGull Riel, easy installation by Industrial adhesive can be placed on any surface and all kinds of buildings, roofs of buildings, cornices, projecting facade, even in outdoor equipment such as air conditioners, industrial and port cranes.

StopGull Riel is a deterrent device for all types of birds that includes the rotating element in its base creating instability birds. StopGull Riel, easy installation by Industrial adhesive can be placed on any surface and all kinds of buildings, roofs of buildings, cornices, projecting facade, even in outdoor equipment such as air conditioners, industrial and port cranes.

StopGull Riel is a deterrent device for all types of birds that includes the rotating element in its base creating instability birds. StopGull Riel, easy installation by Industrial adhesive can be placed on any surface and all kinds of buildings, roofs of buildings, cornices, projecting facade, even in outdoor equipment such as air conditioners, industrial and port cranes.

 StopGull ® Keeper is designed to be installed on radar antennas and in any confined space where birds can perch device. StopGull ® Keeper, with its random motions, causing birds perched dismissed her in places where it is installed. In addition Keeper StopGull cause any interference on the radar.

 Designed to prevent birds from landing in coastal areas and reduced as critical masts, lights, etc.

 Support for pulpit is quick and easy to install. The Air StopGull covers all types of vessels. StopGull Air can be removed from the holder easily.

 Bimini arch support StopGull Air manufactured in 316 stainless steel, suitable to pipe 22 to 28mm.

Bimini collected textile support that adapts to all kinds of biminis and measures.

 Cloth bag 4 kg counterweight with anti-absorbent sand, to install the Air StopGull on mats, rough surfaces, etc. Tape is included for installation and fastening.

 To install the StopGull Air in all types of booms.

 The suction cup for smooth surfaces, is ideal for placing the device StopGull Air on hatches, outboard motors, etc.

 Boat StopGull Air Vent is a system that in addition to protecting your boat from moisture, mold, mildew and bacteria that can cause damage to your boat, you can put on its surface the Air StopGull providing full protection as the Stopgull Air perched protects against any type of bird in your boat.

 Telescopic mast locking cam Boat Vent 3.

 It is a StopGull Air ventilation and support device.

With this support you will get two benefits; prevent gulls and shorebirds from alighting on the anchoring canvas and at the same time ventilate the interior of the boat, avoiding the appearance of moisture, mold, odors and the condensation of cockpit indicators.

 Telescopic mast locking cam Boat Vent 3.

Part to hold and have collected the Air StopGull while we do not use.