Extertronic 10 covers 30-60 m²

Characteristics of the Extertronic 10 mosquito killer:

- Voltage: 230 V / 50 Hz
- Voltage grid 950 V
- Consumption 12 W.
- Actinic light 1 Tube of 6 W.
- Weight 720 gr.
- Coverage: 30 m2 day / 60 m2 (depends on the type of insect)
- Dimensions 145 x 320 mm.
- Position: can be placed suspended or on its base.
- Insect collector with tray / bottom removable container.
- Manufactured with fire retardant ABS material V.0.
- Finished in white and blue.
- Works with 1 tube of 6W of actinic light for the attraction of insects and mosquitoes.
- Its protection system prevents access to the lower part of the appliance, even when cleaning the insect-collecting tray.
- Manufactured following the homologations:
- CE regulations.
- Electrical safety.
- Electromagnetic compatibility.
- Warranty: 2 years

Extertronic 10 installation:

- A good placement is very important to obtain good results. When installing the device, you must take into account that the plug is accessible.
  Artificial or solar light negatively influences the effectiveness of the device, so it is important to place it in places that do not have direct light and that are at the same time the way of passage of flying insects.
  The height is recommended to be about 2'5 meters from the ground, but taking into account that there is space between the appliance and the roof. Try not to place the lamp in places where there is an air current.
- Hang the lamp, do not use the network cable to hang it.

Maintenance of the Extertronic 10 mosquito killer:

-  Never forget to start the cleaning before disconnecting the appliance from the mains. Periodically remove the lower collector, clean it of the insect challenges and replace it. The electrified grilles should be cleaned as many times as necessary, using a brush that is dry.
  The tubes have a limited duration, replacement is recommended every year.
- This device is for indoor use.
- Place the device out of reach of children.